Autowatch Ghost Immobiliser
Ghost Immobiliser is a renowned product that safeguards your vehicle against key-cloning hacking and theft. This TASSA-certified system is unnoticeable by thieves and blocks your vehicle from starting.
This device is silent and uses buttons on your vehicles steering wheel, door panels and the centre console to permit you to create a unique, PIN sequence that can be changed up to 20 characters that must be entered first before the car can start.
Easy to install
ghost immobiliser reviews is more crucial than ever to protect your vehicle. With car crime increasing and cloning tools readily available, it's essential to protect your vehicle. Our Autowatch Ghost immobiliser is a secure and discreet aftermarket solution that protects against key-cloning and vehicle theft. The device is almost indestructible to thieves, and operates via buttons on the steering wheel or the door panels. This allows users to create an individual disarm sequence similar to credit card numbers that must be completed before the vehicle can begin or be driven away. This makes the system virtually impossible to spot and is unaffected by jamming or spoofing devices that are used in other systems available.
The installation of the Ghost unit is a highly-specialized procedure that should only be carried out by an approved installer. The unit is carefully incorporated into your vehicle's CAN bus network, ensuring that it communicates directly with the ECU. The Ghost can be installed without affecting the factory settings. It is impossible for a thief to bypass the system using signal boosters.
When the Ghost is installed with a new and improved sequence to disarm is required to be inputted in order to start your car. This can be done by pressing the service button on your vehicle five times within 2 seconds while making sure that it is not being held for a prolonged period of time. The system will then flash twice to indicate that Transport Mode has been activated. This feature is ideal for classic, sports and prestige vehicles that require their security systems to be temporarily disabled while transport or servicing.
Once Transport Mode is activated, the immobiliser is turned off and cannot be activated by entering your PIN code again. what is ghost immobiliser is perfect for those who wish to store their vehicles over the winter to prevent them from being stolen or to avoid having to pay higher insurance costs.
No LED indicators or key-fobs to indicate its location
The Ghost immobiliser is a discreet device that shields your car from car thieves by utilizing buttons on the dashboard or steering wheel to input an unobtrusive pin code prior to starting the engine. It can be linked to a phone application to arm/disarm remotely. It blocks signal relays, ECU swapping, and key cloning. It's easy to install and can be incorporated into a variety of vehicles. It's also very discreet and can be hidden in difficult-to-access places, such as behind the dashboard, or inside the trim of the steering wheel.
This is a great choice for vehicles with high performance since it will disable your vehicle's ignition if incorrect pin code is entered. This stops thieves from stealing your pride and joy. The device can even send an alert to your phone when you've left the vehicle unattended in public areas, giving you peace of brain while you're away from your car.
The Ghost is different from other immobilisers because it does not require additional fobs or LED indicators. It is also able to be concealed in a difficult-to-reach area of your vehicle. It communicates directly with the vehicle's CAN data network, making it extremely resistant to detection. It doesn't emit radio signals, making it unnoticeable by RF scanners or signal jammers.
It is designed to be weatherproof and tamper-proof. It is also able to stand up to extreme temperatures. It is also impossible to tamper by cutting the wires, or by removing it. It is also undetectable by organised gangs of thieves who employ diagnostics reading equipment to identify security systems. It's also not affected by professional auto diagnostics equipment that examines the CAN data system for the presence of an alarm device.
No circuit cuts
The ghost device doesn't have any LED indicators or key fobs to identify its whereabouts. It is hidden under the steering wheel, dashboard or dashboard of your vehicle and uses buttons to create an unique PIN sequence that has to be entered to start the engine. The thief cannot drive away the vehicle even when they have your keys since they don't know the correct code. The device doesn't transmit radio signals, so organized gangs of thieves using tools for reading diagnostics will be not able to detect it.
This innovative immobiliser is TASSA approved and could help lower the cost of insurance, particularly for vehicles that have been customised by their owners. It also stops key theft and ECU switching, which means the only way for a burglar to take your pride and joy is to pull it.
The system is completely silent as it does not utilize the buttons that are found on the dashboard or in the factory keys. It communicates with the ECU using the CAN data circuit, which is completely silent and does not provide any indication that it was installed. It means that a criminal will not be able to add new key fobs or swap out the ECU to cause your vehicle to start. This eliminates any other methods of theft employed in recent years like key cloning, scans using radio frequency, and code taking.
If you forget your PIN code our engineers have provided you with a reset emergency for the device that allows you to enter "service mode". ghost vehicle immobiliser will allow dealers or technicians to temporarily start and drive your vehicle which allows them to carry out MOTs, maintenance work, or valet parking. Once the technician has finished their task or you have collected your vehicle, simply enter the PIN code and the device will go out of service mode dependent on speed and duration.
No radio signals
The Ghost immobiliser, in contrast to other car security systems does not rely on alarm systems or key fobs to stop vehicles from beginning. Instead it communicates with vehicle's ECU and CAN data circuit to prevent the engine from starting. It's a discrete solution that isn't affected by key-cloning techniques or radio frequency scanning used by thieves to get around security devices. It can be paired with tracking devices to enhance the security of your vehicle. You will also receive alerts if there is any attempt to alter or steal.
The Autowatch Ghost is a TASSA-certified device that is insurance approved and provides a superior level of security against key hacking, copying, and even theft. It uses a mobile application to control the device and is encrypted to protect. It also comes with an encrypted emergency PIN code bypass. It is a discreet, effective and economical way to protect your vehicle from theft.
However, the Ghost is not without its problems. One of the most frequent issues is that users have difficulty to find the correct disarm sequence. The device requires input through buttons that are already on your vehicle, like those found on the steering column or on the centre console. It could be difficult for people to remember, or they may be wrong the first time around. It is recommended to read the instruction manual that comes with the device and then practice the disarming procedure prior to driving.
Another issue is that certain vehicles have issues with the CAN data connection, which can impact the functioning of the Ghost. This can be caused either by faulty sensors, or a damaged OBD connector. It is best to test the system again prior to using it in case there are any issues with the connection to CAN.
Change your PIN code quickly
The Ghost is an excellent product that has been a hit on the market. However, the process of changing the pin code can be a bit confusing. The device is preprogrammed by the installer at the time of installation, however customers may want to change it for various reasons. For instance they may want an alternative button that deactivates the device, or they don't want their installer to be aware. They may also dislike their current pin code. It's simple to change your pin number. Follow the easy steps below to learn how.
It is important to note that you need to turn on the ignition but DO NOT start your vehicle! This process takes only a few moments. The vehicle will then resume normal operation.